I am changing the slave cylinder on my 88 iroc z and want to know if I am suppose to leave that plastic clip thing on there when I install it.

I am changing the slave cylinder on my 88 iroc z and want to know if I am suppose to leave that plastic clip thing on there when I install it. 1 Answer

I have a 1989 Camaro RS V6. On my way home from work yesterday I noticed that all my guages are floating the speedometer was bouncing around between 60 and 70 sporadically. The temperature gauge, oil gauge, rpm and gas gauge were all floating around when I slow down they all start coming back down? For just a second I smelt a very strong burning smell (electrical) that very quickly faded. The SES light has been on constant the whole time this is happening. Same thing was happening on the way to work this morning car is running and driving just fine. I guess today when I get home I can check the codes to see what codes I get as a starting point and work my way from there. I will also check the ground wires to see if maybe I am not getting good connection somewhere. Could it be my battery by chance? Maybe even a stripped wire somewhere?Any help would be greatly appreciated. Thanks! 4 Answers

I know the best advise would be taking it to a mechanic, but I do not have the funds for that they raped my wallet just a little over 2 months ago and now I am the only one working so there is just no...

My 1997 camaro struggles sometimes to get up and go if u know what i mean. I know it has a purge flow problem that the check engine light kept coming on. So back in September wheni had to get it inspected I took it somewhere and they did something to it that the purge flow will never show up for the check engine light to come on. Let me know what u think I should do to fix it. 6 Answers

My 1997 camaro struggles sometimes to get up and go if u know what i mean. I know it has a purge flow problem that the check engine light kept coming on. So back in September wheni had to get it ins...

How do I replace the starter on a 1988 IROC? 1 Answer

I am trying to replace the starter on my '88 IROC. Has anyone come across this bracket from the back of the starter to the engine block? Any suggestions on how to crack loose the bolt that goes in...

88 IROC Z NOISE IN THE RIGHT REAR . 1 Answer

I have a 88 IROC Z i AM tHE SECOUND OWNER. i HAVE RESENTLY REPLACED THE REAR COIL SPRINGS, AND REPLACED ALL OF THE BUSHINGS ON THE REAR SWAY BAR. THE SHOCKS ARE ONLY 2 OR 3 YEAS OLD. I STILL HAV...