We have a 1974 z28 350,t400 auto trans 10bolt posi . My question is the car will run great for a while then completly lose all power to the electrical system, car will stop running no power to anything, then with no reason electical power comes back!! Ive replaced the Starter ,Battery, Positve and negitive cables checked all fuses. Ive neverf seen this type of issue before. Any help would be greatly welcome.

We have a 1974 z28 350,t400 auto trans 10bolt posi . My question is the car will run great for a while then completly lose all power to the electrical system, car will stop running no power to anything, then with no reason electical power comes back!! Ive replaced the Starter ,Battery, Positve and negitive cables checked all fuses. Ive neverf seen this type of issue before. Any help would be greatly welcome. 1 Answer

hey john i have an 82 camaro that i put a 350 motor in it. i also added an electrical fuel pump instead of the mechanical pump. when i start my car she sounds great and i will put it in drive and start down the road she'll run great for about 2 miles then she sounds like its choking and dies. when i try to restart it in nuetral thers times it will run a lil rough and die when it is put in gear or there are times it won't start back up. what are your suggestions 3 Answers

hey john i have an 82 camaro that i put a 350 motor in it. i also added an electrical fuel pump instead of the mechanical pump. when i start my car she sounds great and i will put it in drive and star...

I have a 1989 Camaro RS V6. On my way home from work yesterday I noticed that all my guages are floating the speedometer was bouncing around between 60 and 70 sporadically. The temperature gauge, oil gauge, rpm and gas gauge were all floating around when I slow down they all start coming back down? For just a second I smelt a very strong burning smell (electrical) that very quickly faded. The SES light has been on constant the whole time this is happening. Same thing was happening on the way to work this morning car is running and driving just fine. I guess today when I get home I can check the codes to see what codes I get as a starting point and work my way from there. I will also check the ground wires to see if maybe I am not getting good connection somewhere. Could it be my battery by chance? Maybe even a stripped wire somewhere?Any help would be greatly appreciated. Thanks! 4 Answers

I know the best advise would be taking it to a mechanic, but I do not have the funds for that they raped my wallet just a little over 2 months ago and now I am the only one working so there is just no...

i have a 99 v6 camaro. i recently replaced all the fuses and now the SES light and Reduced Engine Power light came on and the throttle doesnt work. I cant drive it to get it looked at because the throttle doesnt work and im assuming its something simple because it only happened after i replaced all the fuses. how do i fix this? 5 Answers

i have a 99 v6 camaro. i recently replaced all the fuses and now the SES light and Reduced Engine Power light came on and the throttle doesnt work. I cant drive it to get it looked at because the ...

86 Camaro sat for 10 yrs, turns over but no fuel pressure. replaced pump and don't hear it running. Also no spark either. tried to do diagnostic scan, but check engine light wont come on to read codes, also no oil or temp gauges light up either. It ran great before I stored it. Could it be the ECU causing the problems. Tested pwer to distributor and its fine. has power to coil as well. 1 Answer

1986 Chevy Camaro V6 2.8 it turns over fine but no spark. Dist. is rusty inside and will replace. But don't think that will cause New fuel pump not to work either or Check engine light to operate to r...