where can i get the moulding clips that holds the trim on the front of the fenders below the headlight it aligns with the grill

where can i get the moulding clips that holds the trim on the front of the fenders below the headlight it aligns with the grill 3 Answers

I have a 2004 crown victoria there is a clicking in the dash , withthe key off & out of car it still click . the only way to stop it is to disconect the battery I was told it was temp blend actuator ,it seems it is under the dash if I can get to it it can be replaced , how come even with the key off this thing keeps clicking . Any help with this would be a great help . thank you in advance mike d. 5 Answers

I have remove the radio & glove box & under steering wheel it got to be somewhere . next is the airbag and temp control panel . I am trying to keep from remove the whole dash.

99 Crown Vic needs a control module/resistor which I was able to get with no problem; I also need a resistor which is on the engine side,of the firewall, and I have no diea what thispart is in order to replace it; a/c blower motor died 4 Answers

a/c working, though only on high, along with heat; compressor is fine, blower motor cut off; my mechanic tolde me to get a control module/resistor, as well as a resistorthat goes on the fire wall...

Where is the fuse located for the ac blower fan? 9 Answers

The ac blower quit....hoping it's the fuse....can you tell me where it's located and what size fuse it is?

Hose on the driver side of the black box 1 Answer

Were dose the house go and if it gets ripped out well your had drain out