2002 Chevy S-10 4.3 v6 that has the code of cyl 4 misfire but there is no misfire.
Asked by QEBOLDUC Apr 19, 2016 at 11:42 AM about the 2002 Chevrolet S-10
Question type: Maintenance & Repair
on my 02 Chevy S-10 4.3 v6 that has the code of cylinder 4 misfire but there is no misfire, the truck runs and idles perfect, I have to get the thing smog tested and it will not pass because check engine light is on.
MAF sensor was cleaned and plug and wires are new. its like the code is stuck in the computer.
3 Answers
All tho, it may have ben a fluke and is cleared up. You can go to Auto Zone and use their scanner to clear the code which will reset the check engine light. But if it comes back on and you get the same code it would be:P0304 CHEVROLET - Cylinder 4 Misfire Detected.... Possible causes - Faulty spark plug 4 - Clogged or faulty fuel injector 4 - Faulty ignition coil 4 - Fuel injector 4 harness is open or shorted - Fuel injector 4 circuit poor electrical connection - Ignition coil 4 harness is open or shorted - Ignition coil 4 circuit poor electrical connection - Insufficient cylinder 4 compression - Incorrect fuel pressure - Intake air leak
HeatherSonomaHelp answered 7 years ago
My harness for the fuel injectors broke lose from the bracket and the wire harness from the fuel injector snapped please help. TRUCK NEEDED NOW!
Post as a new question.