i have a 1984 ford ranger , i can put a 12v to the pump at the tank and it will push gas up to the motor but when i put the conection on the top of gas tank fuel pump points it does nothing,

i have a 1984 ford ranger , i can put a 12v to the pump at the tank and it will push gas up to the motor but when i put the conection on the top of gas tank fuel pump points it does nothing, 1 Answer

I have a 2001 Ford Ranger automatic I was getting on the freeway and it kept giving itself gas accelerator stuck but there's a pedal next to the right hand side of the accelerator what does that pedal 2 Answers

I have a pedal on the right hand side of my accelerator it's a small pedal I don't know what that's for can you help me

I have a 96 Ford ranger, 4 cylinder manual and have a problem I can't figure out. I can start the truck every time with no problem it isles great and I can sit there and rev it all day no problem but if I go to drive it I can make it about 1/2 mile and then that's it, ill press the gas petal and it won't do any thing but kill the gas (no gas) but soon as I take my foot off the gas it will idle just fine and rev fine but won't go anywhere unless I let it sit for a few mins and it will start all over. I have replaced the IAC, TPS and today the external fuel filter that was clogged but same thing. Once in a while if I push the clutch in it will stay at a rev for a sec. Please help 5 Answers

96 Ford ranger need help :(

I have a 1991 Ford ranger and I have burnt up two fuel pumps due to it running all the time when truck is on. Any Ideas on whats wrong? 1 Answer

My ranger is burning up fuel pumps, I am on my second fuel pump. The fuel pump runs even when the truck is shut off. I have to remove a battery terminal to keep from eating fuel pump up. Help!

My 1989 Ford Ranger 4X4 will not move if I put it in Overdrive. I can manually shift through all the gears including overdrive, but if I have to stop and start back off in overdrive, it will not move. 6 Answers

My 1989 Ford Ranger 4X4 will not move if I put it in Overdrive. I can manually shift through all the gears including overdrive, but if I have to stop and start back off in overdrive, it will not move ...