How do I change the gasket and seal on my 1984 Honda Accord? I have changed the oil and when I started the engine the oil was leaking

How do I change the gasket and seal on my 1984 Honda Accord? I have changed the oil and when I started the engine the oil was leaking 1 Answer

when i pull of and push on the gas the excelleration dies down the picks back up and sputts and poots ive had the wires changed and the coil change what could it be on my 91 honda accord ex? 1 Answer

when taking of fast the excellertion dies then picks up!

MY 1996 Honda Accord does not start. I have replace spark plug and wires. I had a tune up I had the engine check what is wrong? 1 Answer

My 1996 Honda Accord does not start. I replaced all four spark plugs and the car started. I took the car to a mechanic by this time the engine light was on. I ask for a oil change. He attached the car...

I have a 2001 honda accord and today my car wouldnt start up , i tried for about 5 mins then i stepped on the gas a little while i was trying to crank it and it finally turned over! My check engine light is on , i just had a few repairs on my car like changing front o2 sensor and brakes and oil change. My car has been hesitating alot in last few months. when i stop at a stop sign for example and then i press on the gas it takes awhile to feel like its normal full power til i step on it kinda hard then it shoots forward to normal. I had 2 codes coming up on my car , the mechanic cleared one when he changed out o2 sensor it was blistered (code had something to do with heating element) but he couldnt clear other code he was hoping in few days it would clear on its own after my oil change p1259 . any suggestions on what i may need this is my only transportation? 2 Answers

Honda accord 2001 p1259 code . car not wanting to start up right away, and hesitates on acceleration

After oil changed how to reset the Maintenance Required Light on 2014 Honda Accord 1 Answer

After the oil changed for my 2014 Honda Accord, the Maintenance Required Light was no longer on, therefore I cannot read odometer, trip meter and other gauges. What is the procedures to reset it after...