migration_judge_roy answered 11 years ago
have you tested if you are getting voltage to the coil packs?....I mean they are perfect, don't get me wrong, but the power to them is what? as if the key is not getting turned? I think there is an ignition relay and/or fuse you probably want to inspect~
drove to work as normal time to come home naint started since.replaced coil pack & crank sensor n still wont start,cranks good but still no spark
1996 Chrysler Town & Country
-
Maintenance & Repair
When I turn the van off it wont start again for a while, and then after its sits a while it starts with no trouble!! But I got codes saying my turn signals are out and they're not?? What do I ch...
2008 Chrysler Town & Country Touring FWD
-
Maintenance & Repair
power to radio, windows, but no dashboard lights. Engine will turn over, but will not get a fire to start up. Fuses are good, battery is ok.
2002 Chrysler Town & Country LXi LWB FWD
-
Maintenance & Repair
So lastnight was out in garage had radio in the van going then after 15 mins or so I realized I should probably start it so it doesn't drain the battery so I started it and it fired up then after a...
2006 Chrysler Town & Country LX LWB FWD
-
Maintenance & Repair
I have a 2009 town and country van that my driver pulled a fuse to replace and when replaced the van then would not start, the lights and everything come on but it will not turn over. We have tried ...
2009 Chrysler Town & Country
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.