littlehorn answered 17 years ago
I believe there are one or two hidden screws in that area that hold the center panel on, at which point the whole center console piece that covers the radio can be pried off gently with a screwdriver. You might want to check a haynes manual for location of the screws, however.
2004 Dodge RAM 1500
-
Maintenance & Repair
The window mechanism, ie; all needs replacing; how do i remove the inner panel, already have the outer door panel removed!
2004 Dodge RAM 1500 SLT Quad Cab RWD
-
Maintenance & Repair
need to change the fuel pump.
2004 Dodge RAM 1500 SLT Quad Cab RWD
-
Maintenance & Repair
I've removed 2 bolts, and see nothing else holding the starter on. I've rapped on it with a hammer, but it won't break free from the bell housing.
Dodge RAM 1500
-
Maintenance & Repair
Why does dodge use a oil pan drain nut that is not metric nor standard size . The nut was not 1/2 inch nor was 13mm not 14mm. Nor was it 9/16. Why would any car manufacture make a bolt that needs ...
2004 Dodge RAM 1500 Laramie Quad Cab LB RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.