I have 1999 Dodge 1500 2wd automatic truck start quick, I put into reverse and truck starts to shake like it wants to move it but it really moves a little and on drive it don't shift right in between?

I have 1999 Dodge 1500 2wd automatic truck start quick, I put into reverse and truck starts to shake like it wants to move it but it really moves a little and on drive it don't shift right in between? 1 Answer

I have a 97 dodge ram 1500 v8. Truck runs fine, idling but when I start off it starts to shake really bad up to about 25 mph and then it settles down. Any ideas? 4 Answers

Truck was running great. I was sitting at stop light, I heard a small "clunk" sound then when I started going, the truck started shaking really bad. When I get to 25 mph or more, (haven't gone above...

I have a 95 dodge ram that I am having problems with no reverse. The truck is not worth enough to drop a lot of money on a new or rebuilt transmission. Im not a mechanic, but like to tinker. The truck had issues with forward gears but reversed was working, I didnt have the money to fix so I let it sit for over 3 yrs. I decided to tinker with it, I replaced the control solenoid, filter and fluid. now all forward gears work great but when I put it into reverse, It will back up slowly on its own, but if I give it gas it just revs up like its in nuetral and it vibrates like its trying to back up but wont go. Fluid level is good, nothing was found in the pan (very little shavings). Could it be air in the lines? bands need to be adjusted? or what? 1 Answer

reverse issues

I have a 2007 Dodge Ram with the 5.7 hemi. Driving the truck and it starts to drop in rpm then shuts down completely. No codes were thrown. Sounds like it wants to start but not getting fuel? 2 Answers

Will it still try to start even though pump is bad? Heard mixed stories.

I have a 2000 Dodge Ram 1500 with the 5.9. When I first start the truck it will go in every gear and move but it doesn't move very fast. Feels very heavy but after a little bit it stops moving. 2 Answers

And it will not shift into any gear after that point. It threw the code some psi isn't enough for something I can't really remember.