Asked by Guru9GWTNN May 29, 2023 at 11:38 AM about the 2004 Ford F-350 Super Duty
Question type: Maintenance & Repair
replacing license plate back lights with new assembly and have no power?
If the tail lights work then you have wiring issues. Yes grab a test light and start testing circuits for the plate lighting.
replacing license plate back lights with new assembly and have no power?
2004 Ford F-350 Super Duty
-
Maintenance & Repair
My 2011 F350 Super Duty is stuck in 4 wheel drive
2011 Ford F-350 Super Duty Lariat SuperCab LB 4WD
-
Maintenance & Repair
2011 F350 super duty diesel. replaced front pads, pushed the calipers in, pumped the brake pedal until it is hard, now can't get the truck out of park, have no brake lights, and the digital dash says...
2011 Ford F-350 Super Duty XL 4WD
-
Maintenance & Repair
2010 Ford F350 Super Duty V10 gas engine cranks try's to start, but it don't. we have replaced, fuel pump, fuel filter, cam shaft sensor, crank sensor, and still won't start. I have it at a Ford Deal...
2010 Ford F-350 Super Duty XL
-
Maintenance & Repair
The overview here states: "Ford has recalled all the Super Duty trucks with diesel engines: a problem with the temperature control software presents a danger of tailpipe fires." However, the Regional ...
2008 Ford F-350 Super Duty
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.