Loss of pressure to slave cylinder

Loss of pressure to slave cylinder 1 Answer

2012 scion tc manual 6sp, had noise when in neutral and pressing clutch, then releasing. No shifting issues ever, just noise as previously mentioned. Had clutch replaced with factory OEM kit, including pressure plate (which is LUK not OEM) car is getting stuck in reverse and rattling/squealing sound when trying to drive it. Has also jumped out of 3rd gear when accelerating uphill. Fluid was changed in trans and replaced with heavier weight and Lucas gear oil was added. Unable to drive car and shop where it was replaced refuses to do anything about it!! 12 Answers

Car had noise when in neutral and pressing clutch, then releasing. No shifting issues ever, just noise as previously mentioned. Was told it was clutch release bearing, the car has 106k miles so wen...

A scion tc part i need to know the name of 3 Answers

My scion tc's clutch pedal (it is a manual) was depressed to the floor and we figured out it was a little piece behind the clutch pedal that connected it to this rod that went into the upper floor ...

Power loss , hesitation, stalling 5 Answers

fine all the way home. The engine light hasnt came on yet, has a new battery, terminals are clean and not corroded, ive had the car fir years and first tine its done this. Anyone have similar probl...

my TC "maintenance required" light went on a few days after I got the oil changed. This light came on and thought it was for tire pressure, so I had that looked at and the light was still on. He turned it off for me, but now I'm thinking I should have looked to see if any else is wrong. The oil is OK. 2 Answers

What problem initiates the "Maintenance Required" light to go on? I had my oil checked and that is OK. I had the tire pressure checked, and it was OK so I had him turn it off. Is it "off" permanent...