I have a 1989 Dodge Ram 50. I was thinking of running seafoam through it, but I haven't seen anything on how to add the seafoam to the crank case (oil) Has anyone done this, and have any advise?

I have a 1989 Dodge Ram 50. I was thinking of running seafoam through it, but I haven't seen anything on how to add the seafoam to the crank case (oil) Has anyone done this, and have any advise? 1 Answer

1989 dodge d50. I'm replacing the silent shaft belt but I have a problem figuring how to take off the crankshaft pulley bolt? right hand thread or left? any standard procedure I'm unaware of? have a hanes manual too. 1 Answer

replacing the water pump, timing belt and silent shaft but I can't figure how to get the silent shaft on because the pulley on the crank shaft has to come off so I can slip the belt on.

I have a 1989 Ram 50 pickup with a v6 3.0 that is missing the computer what part number did it have for the computer? 1 Answer

I just need to know the part number for the correct EC M computer

I need to change a flat on my 1982 Dodge Ram 50? I need to know how to get the spare off and where to put the jack? 3 Answers

I has rust on the spare. I'm thinking I'm better off to just remove the tire and get it replaced. How do I get the hub cap off without damaging it?

I've triple checked my timing marks but I still have symptoms of it being 180% out. It ran before I swapped the oil pump and I didn't break the timing chain... I set the distributer on the spark plug 11 Answers

I set the spark plug closest to radiator as top dead center and alighned the distributor perfect but my symptoms still say 180% out