Rep
Asked by GuruXSRGS Oct 27, 2018 at 09:55 PM about the 1983 Dodge RAM Van
Question type: Maintenance & Repair
Just put in a new starter in my 1983 Dodge Ram
250 Van, and still will not start. Battery is 100%
charge, all wires have been checked and are
good,relay switch and fuses good,even alternator
good... STILL will not start.... any suggestions???
6 Answers
Do you know how to jumper the relay to make the starter crank? If so do it if the starter cranks over, the ignition switch would be next on my list. Did you try moving the shifter and try to start in neutral to check the neutral safety switch. I hope this helps you, take care
The ignition switch can be turned on.. you can hear it through the relay
So did the starter crank the engine when you jumped the relay?