1979 fuel injected beetle voltage readings at the double relay
1979 fuel injected super beetle. rebuilt engine but won't start. has a "new"
rebuilt Mass airflow meter and replaced the double relay (used}. here is what
I have:
Ignition Off: 88y & 88z - 12 v supply good
Ignition On: 86c is only position with voltage
88a & 88b - 0 volts
86b & 88c - flap open 0 volts
When i apply 12v directly to test the relay, both sides close and open
normaly.
I'm thinking that it is no use to worry about testing the CSV or TTS until I can
get these voltages normal.
Would appreciate some help !!