I just put on an inline fuel pump and need to run a wire to a power source. I can't find where to plug in an accessory. There's no plugins behind the fuse block. Where can I run the wire to?

I just put on an inline fuel pump and need to run a wire to a power source. I can't find where to plug in an accessory. There's no plugins behind the fuse block. Where can I run the wire to? 1 Answer

I have an 87 D21 Nissan truck it will start and run but just a second then stop firing you can leave it over night and it will crank again. I have changed the coil got the same thing. I checked the voltage to the coil with switch on its 12.95 volts when turning over it goes down to 9.5 volts. any suggestions ? 5 Answers

I have an 87 D21 Nissan truck it will start and run but just a second then stop firing you can leave it over night and it will crank again. I have changed the coil got the same thing. I checked the vo...

I put in a new fuel pump, but the pump is not working. 2 Answers

After putting the pump in the tank, and the tank in the truck, pump does not work. Checked fuse and relay, event checked power at the harness. Removed the tank and new pump and directly connected th...

My kid has a 1987 nissan se pickup ,everything worked on it until he hooked the battery up backwards, now all that works is it'll crank over ,no lights etc. ,won't run ,Help where do I even start ,T 6 Answers

He hooked the battery up backwards and said he saw something smoking and now all it'll do is crank over ,won't run ,no horn ,lights, radio etc. Where the heck do I start? Thanks,mike

I have a 90 D21 pickup 5 speed 2x4. My problem is that it will crank, run idle and I can rev the engine but when I put it into gear it lose power, won't go 2 Answers

When I put my truck in gear it loses power and shuts off. I have redone my timing chain, replace my exhaust, tune-up, mass air sensor, O2 sensor, fuel pump and filter, and distributor. I still have th...