Hello, I have a Porsche 924 4 L manufactured in January 1979 with VIN number 9249206698. I need to replace the fuel pressure accumulator. My mechanic will change it if I get the part.

Asked by NZamateur Apr 22, 2018 at 12:28 AM about the 1979 Porsche 924

Question type: Maintenance & Repair

I have a Porsche 924 manufactured in January 1979 with VIN number
9249206698.  I need to replace the fuel pressure accumulator.  My mechanic
will change it if I get the part.  I have found a Bosch part numbered
0438170015 and then also there is a part 0428170024.  Which one should I
buy for my car please?

40,195

James answered 6 years ago

0438170024 should be it

Mark helpful

NZamateur answered 6 years ago

Thank you.

Mark helpful

Your Answer:

Hello, I have a Porsche 924 4 L manufactured in January 1979 with VIN number 9249206698. I need to replace the fuel pressure accumulator. My mechanic will change it if I get the part. 2 Answers

I have a Porsche 924 manufactured in January 1979 with VIN number 9249206698. I need to replace the fuel pressure accumulator. My mechanic will change it if I get the part. I have found a Bosch p...

1979 Porsche 924

-

Maintenance & Repair
Car bogging when I press gas pedal 1 Answer

So I have a yellow 1979 I just bought, when I press the gas it just Bogs and won't go over 15 mph or if I put it in 2nd gear it doesn't get power. I want to know if it's a fuel line issue or inject...

1979 Porsche 924

-

Maintenance & Repair
Just got 1980 924 non-turbo started after previous owner rebuilt fuel dist. Car does start, but will idle smoothly for 4-5 seconds and then stumble for 2-3 seconds like it is starving for fuel. Thi 4 Answers

This goes on and on....does anyone know what I should look at or adjust? I have the fuel pump hotwired because it does not operate

1980 Porsche 924

-

Maintenance & Repair
'79 Bosch CIS fuel injection control pressure to high 24 Answers

I have a '79 924 Porsche which used pretty much the same CIS injection as my 81 & 82 VW Rabbit convertables. Control pressure is only about 4 LBS's less than my system pressure of 75 LBS, and car won'...

1979 Porsche 924

-

Maintenance & Repair
Not sure how to say this, but I step on the gas and the car starts going, then it seems to just cut off all power for a while, and then it comes back for a little bit. Not sure what is going on. Any ideas of what to do? 1 Answer

I went to drive my car and it started up fine. Started driving to the corner, turned and started going up the block when it just stopped. I had my foot on the gas, but nothing. Then, it just started...

1987 Porsche 924 S

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.