I'm redoing my 1970 Buick Skylark. When I pulled the tank, a big sheet of some sort of thick rubbery material was in between the tank and the bottom of the trunk. it was pretty torn up so I decided to get rid of it I know that it was some sort of buffer between the two. I've been looking online and can't find what to use. Anyone have any ideas and finding a replacement??

I'm redoing my 1970 Buick Skylark. When I pulled the tank, a big sheet of some sort of thick rubbery material was in between the tank and the bottom of the trunk. it was pretty torn up so I decided to get rid of it I know that it was some sort of buffer between the two. I've been looking online and can't find what to use. Anyone have any ideas and finding a replacement?? 2 Answers

i have a 1989 Buick Skylar with 79000 miles and after I fill the tank with gas after driving it it wont start. But it will start cold but not after it runs for awlie. 3 Answers

Whenits cold it will start right up but when I drive it after putting gas in when I shut it off it wont start until cool. No check engine ligths are on.

I don't hear fuel pump when key is turned on like I used to. What are the chances of the problem being in electrical system or pump it self 5 Answers

car stalled all of a sudden. won't start and I do not hear the pump when I turn key on like I used to.Could it be something other than pump or most likely the pump?

I can't get the rear brake drums loose, SOS, anyone know how? 2 Answers

My rear brake drums are heavily rusted, but after an afternoon of wd-40 and PB, with a 5 pound sledge, they just won't budge. In one set of instructions, and a couple of conversations I was told to r...

what are the torque specs for a 2.5L1990 buick skylark custom cylinder head and rocker arms 1 Answer

Need torque specs for a 2.5L 1990 buick skylark custom rocker arm and cylinder head