My turn signals & hazards quit working for my 1999 Chevy Blazer. Help! =(
Asked by Jack Jul 20, 2014 at 12:14 PM about the 1999 Chevrolet Blazer
Question type: Maintenance & Repair
I have a 1999 Chevy Blazer and this morning the turn signals & hazards quit working.
Everything else seems to be fine like the lights, radio, etc. I called Auto Zone & they
suggested to replace my relay box. Does that sound right?
7 Answers
Well I checked the fuse box located on the left side panel by the steering wheel. I found a fuse labeled "Turn", I assume that was the right fuse. I tried replacing it, and nothing happened. So it looks like it might be the turn signal relay box.
If I remember right, the turn signals and the emergency signal lights are two different circuits. Try checking for broken or lose ground wires. Also check to see if you are getting any power to the light sockets. Auto zone will sell you a new hubcap if they can. Their solution is keep throwing their new parts at it until you fix it.
Ok....here is where I'm at....today I changed the electronic flasher (located underneath the glove box) and now my turn signals do work, but still no hazard lights. Any suggestions?
Thank you Js08016....you're right...it was a fuse located under the hood that needed replaced. Thanks so much!
My sign lights are not working fuses are good
I have 2008 Chevy trailblazer and my left side turn signal and hazard light not working
I have a question for Jack or anyone that can answer, where is the fuse box under the hood located? 97 trailblazer