Have you checked out the fault codes in the engine management system ? They will either be : P0--- or P1--- Fault codes. Start there.
P0 --- or P1---- These are Fault codes for the Power Train. These codes are universal for all cars. They are ISO Standards. It might be a P0113 or so on will represent an area of the EFI System. These pault codes will stay in the Non-Volitile memory until the code is cleared using Diagnostic Test Equipment.
as above engine cuts out ,recent repairs include cleaning throttle body catalytic converter replaced 1.4 petrol duratec ghia
2006 Ford Fiesta
-
Maintenance & Repair
Speedo arm does not move off zero, then next start-up, everything normal. Engine can just die on long hill ( with A/C on). Not steep. Shut everything off, restart and all goes as usual. Cyclical metal...
2008 Ford Fiesta
-
Maintenance & Repair
Pops out of gear in 4th and 5th gear any suggestions? Ty in advance
2009 Ford Fiesta
-
Maintenance & Repair
I have a 2015 Ford Fiesta Manual. When turning the key in the ignition (with the clutch fully depressed) the engine does not fire. The ignition just makes a clicking noise and the dashboard lights f...
2015 Ford Fiesta
-
Maintenance & Repair
My ford fiesta 2008 ; when the car started and run above a 10 km if we turn off my car can't restart that time need to cool the engine, what is the problem behind it, battery, oil, coolent are per...
2008 Ford Fiesta ST
-
Maintenance & Repair
CarGurus has 150 nationwide Fiesta listings starting at $3,777.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.