1994 Impala LT1
Asked by zimer May 12, 2010 at 07:01 PM about the 1994 Chevrolet Impala
Question type: Car Customization
Have a friend with 1994 Impala with 350/5.7L and 3.73 rear end for more torque.
Besides all upgrades K&N Intake etc...... how can I boost more performance out of this baby?
Dyno and re-flash PCM is done, how about Hypertech Chip??
Any advise, much appreciated.
zimer
2 Answers
hey, have you tried looking into a bigger performance cam. those lt1's wake up a lot with cams. you can also do headers for the exhaust and a larger diameter throttle body. those are all flow adders. you can also get a hotter coil that will deliver more spark to the opti-spark system. also try a 160 degree thermostat. it keeps the engine cooler and fools the coolant temp sensor into thinking its cold and will richen the fuel. just some thoughts.
JaredatAllAboutCarsd... answered 6 years ago
Daniel’s suggestions are spot on, but if you’re going for serious horsepower it’s gonna involve forced induction from turbos or a supercharger=expensive and technical.