mikeatpriestlake answered 9 years ago
clogged fuel filter, bad fuel pump. have the fuel pressure tested. you should be able to hear the pump cycle when you turn the key to the on position without starting the truck. if you cant hear it, check the fuel pump relay. if all fuses and relays associated with the fuel system are good, but the pump still wont go it is probably the pump.
The1982 GMC CEAREL V.8 305 engin wll not start what could stop it from starting
GMC Sierra 3500
-
Maintenance & Repair
Im looking for a A/C noise/vibration install brace kit. Or what was in the kit so I can stop the noise or vibration threw the truck. Kit number is 91-1B-154 but it is discontinued. Any ideas? I'm ou...
1990 GMC Sierra 3500 2 Dr C3500 SLE Extended Cab LB
-
Maintenance & Repair
Have changed Cap , Rotor , coil , plugs , wires. Have a misfire that I can't get rid of HELP , THANKS 454 , Vortex
1998 GMC Sierra 3500 2 Dr C3500 SL Extended Cab LB
-
Maintenance & Repair
What is the load capacity of this vehicle? 1983, GMC G3500, 350 cid, 4 bbl carb, 4 speed trans. floor shift, 4.10 : 1 rear gear, flat bed, LWB. What is its towing capacity? It's GVW is given as just...
1988 GMC Sierra 3500
-
Maintenance & Repair
04 GMC 3500 Sierra 6 litre engine running badly at idle it misses terribly. Under load driving, it has no power AND RUNS BAD MISSING. REVING IT UP WITH NO LOAD IT SOUNDS GOOD. tHE CODE READER SAID T...
2004 GMC Sierra 3500 2 Dr Work Truck 4WD Standard Cab LB DRW
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.