My Ford bantam 1.3 rocam don't want to start. There is power but just make a click sound. What could be the problem?

My Ford bantam 1.3 rocam don't want to start. There is power but just make a click sound. What could be the problem? 3 Answers

Hi there, My ford falcon BA XT 2005 Automatic Transmission. Having problem is not shifting from 2nd gear to third my mechanic have scan it he did not find any problem. 1 Answer

Hi there, My ford falcon BA XT 2005 Automatic Transmission. Having problem is not shifting from 2nd gear to third i my mechanic have scan it he did not find any problem, he said all the four solin...

My car has new spark plugs, and no other known issues but when i pt my foot down a little it chugs but once i get to speed and i ease foot off it is fine what could this be? 2 Answers

has new spark plugs, runs beautiful usually and still does once at speed i want to be at or i am not giving way and taking off.

I had to replace the ignition switch in my 1961 Ford Falcon. There are 4 wires that go inside the back of my old ignition switch that I don't know what poles to connect them to in the back side of my new switch. Any idea? 1 Answer

1961 Ford Falcon replacing the ignition switch- the old one has 4 wires, a thicker yellow, red with gray stripe, black and red with green stripe going into the back of ignition. The new switch has ...

My 64 Ford Falcon has a turn signal problem. 5 Answers

All the lights work including the dash indicator. I can turn the indicator switch on and the correct direction will light up front and back but will not flash. Have replaced the flasher, wiring harn...