I have a 94 Cadillac Seville STS 4.6 I have put my intake in my injector lines
back on I should see my fuel lines and I'm wondering is there a sequence to
make sure that my lands are full before I start it
Go ahead and install the fuel lines. Just cycle the key a few times to fill the fuel lines. Do not cranks the engine. Like on for 3 seconds off for 10 seconds then on for 3 seconds. Do this a few times and if everything is as it should be your ready.
As mentioned above, just chage the fuel lines by cycling the pump on and off.
I have a 94 Cadillac Seville STS 4.6 I have put my intake in my injector lines back on I should see my fuel lines and I'm wondering is there a sequence to make sure that my lands are full before I s...
Cadillac STS
-
General
I got my car together the injector and intake all back together what is the procedure start the car to make sure there's enough fuel my fuel lying so I know there's a sequence to it so what is it to...
Cadillac STS
-
General
I'm "test driving" your site to list my car. 2005 appears to be the earliest year available on the drop-down. Is there a way to list a 2001?
2005 Cadillac STS V8 AWD
-
General
What is the difference between a platinum and luxury pkgs
2008 Cadillac STS V8 Premium AWD
-
General
The engine failed today in my 2006 Cadillac STS with all wheel drive and I am looking for a replacement and the question is electric cooling fan or belt driven cooling fan. How do I determine which o...
2006 Cadillac STS V8 RWD
-
General
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.