fuse #8 (front engine box) continues to blow after replacement; it controls the tail lights
One of the replacements I tried was 5 amps higher (20) but it blew too. Anyone have any ideas?
mikeatpriestlake answered 10 years ago
sounds like you must have as short somewhere, check the wiring.
One of the replacements I tried was 5 amps higher (20) but it blew too. Anyone have any ideas?
Chrysler 300
-
Maintenance & Repair
My tail lights (park lights) do not work, but the turn signal works and the break lights work. Not sure where to look for the reason for the shorting out of the #8 fuse.
2007 Chrysler 300 Touring AWD
-
Maintenance & Repair
The brake light come on, the turning signals come on, and everything else seems to be working properly. The ABS light is n also. PLEASE HELP!!!
2005 Chrysler 300 Touring RWD
-
Maintenance & Repair
I am experiencing over heating and it appears that the lower fan is not operating. The fan assembly has been replaced once and my supplier thinks it's a failed relay. I'm trying to replace it.
2006 Chrysler 300 SRT8 RWD
-
Maintenance & Repair
Please help me find the exact fuse that control the tail lights on this 2007 chrysler 300. Ive tried replacing some but still havent found the one to control tail lights. My wipers nor horm work. ...
2007 Chrysler 300
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.