car problem

Asked by Zolani Jun 14, 2019 at 02:28 AM about the Ford Bantam

Question type: Maintenance & Repair

Hi  I have a ford bantam rocam and I just changed a gear box but with an old working one and I can't hear the fuel pump run the sound of it when I turn on the key I used to hear the sound of it, I checked the fuse in front on the driver side it is still working and the car its starting but as it get hot as it run it start to cut, it cut like when a car its about to run out of a petrol but the thing is it doesn't stop it keeps on going but I can't us the accelerator as normal as I change gears after changing a gear it starts with the cutting problem and when I try to adjust my foot on the accelerator as if I'm shifting my foot off of it it runs fine but as soon as I try to drop the whole accelerator pedal it starts the cutting problem  please help

2 Answers
3,775

Randy answered 5 years ago

This is hard to solve really because there is a ton of confusion in the story. Sounds like fuel issues perhaps dirty filter. Gas pump could be going out they do not last forever. I like Delphi to Motorcraft. Might have get new tank as well because it could be littering small debris into pump or filter. Get fuel pressure to motor checked out after replace filter. It's the cheapest thing to do first when troubleshooting gas issues. Secondly I doubt there is a fuse running the pump. It could be a black box on fuse panel. Fuse cover should tell you.good luck

2 people found this helpful.
Mark helpful
16,945

Guru97FK8 answered 5 years ago

the 2007 Bantam has the Euro 2 Bosch PCM, where as the earlier Bantams use the Euro 1 Bosch PCMs. Check if they both use separate Cluch and Brake switches. Check the part numbers are correct for both systems for the clutch and brake. Check also the speedo drive sensors on the Transaxel. The part numbers may be different.

Mark helpful

Your Answer:

Related Questions

  • car problem 2 Answers

    Hi I have a ford bantam rocam and I just changed a gear box but with an old working one and I can't hear the fuel pump run the sound of it when I turn on the key I used to hear the sound of it, I che...

    Ford Bantam

    -

    Maintenance & Repair

  • Starting problem 1 Answer

    Hi all.i have ford bantam rocam engine 2007 model, I've got a huge problem with my vehicle I hit a hump with my vehicle than it turns off immediately, afterwards my fuel pump was not working,I don...

    Ford Bantam

    -

    Maintenance & Repair

  • Starting problem 4 Answers

    Hi my car have a starting problem n tha light next to clock stay on / not flash

    Ford Bantam

    -

    Maintenance & Repair

  • The Car cannot start 3 Answers

    I am driving a ford bantam rocam, the problem is that I have left the car at work on Monday. On Wednesday when I try to start it just keep quiet. It does not even make jerrjerrrjerereeeee, it is just ...

    Ford Bantam

    -

    Maintenance & Repair

  • Electrical Problem cranks but won't start 7 Answers

    Hi. I have a 2007 Ford bantam rocam engine. It cranks but won't start. I discovered that the computer box was replace with a bigger box which is for cars pre 2007. I did some research and changed ...

    Ford Bantam

    -

    Maintenance & Repair

Bantam

Looking for a Used Bantam in your area?

CarGurus has thousands of nationwide listings and the tools to find you a great deal.

Postal Code:

Shortcuts

Search Ford Bantam Questions

CarGurus Experts

  • #1
    Guru97FK8
    Reputation
    15,630
  • #2
    MrRocket12
    Reputation
    1,150
  • #2
    Janus Welgemoed
    Reputation
    1,150
View All

Find great deals from top-rated dealers

Search

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.