bantam rocam 1.6l model 2009 does not crank?
10

Asked by erfbak Aug 04, 2020 at 05:17 PM about the Ford Bantam

Question type: Maintenance & Repair

replaced piston rings and pistons had head skimmed added top head saver +-
4mm. when attempted to start, could hear fuel pump kicking in, but only few
cranks no fire.  What could be issue? connected direct wire from battery to
solenoid. got crank but no fire.

1 Answer
16,935

Guru97FK8 answered 4 years ago

Check the position of the starter selonoid cable. Its possibly running in the same channel as the crank angle sensor wiring. Remove the starter selonoid wire out of this channel and re rout it away from the crank angle sensor wiring. The high voltage current from the starter selonoid, is inducing this voltage into the crank angle sensor wiring.

Mark helpful

Your Answer:

Related Questions

  • bantam rocam 1.6l model 2009 does not crank? 1 Answer

    replaced piston rings and pistons had head skimmed added top head saver +- 4mm. when attempted to start, could hear fuel pump kicking in, but only few cranks no fire. What could be issue? connected...

    Ford Bantam

    -

    Maintenance & Repair

  • Ford bantam rocam engine . Crank no start 1 Answer

    Hi. I have a 2008 ford bantam rocam 1.3. It cranks and has fuel and spark but no start. I'm using a 1.6 ecu for pre 2007 bantams. I also changed the flywheel to match the ecu 36-1 teeth. Does the ...

    Ford Bantam

    -

    Maintenance & Repair

  • How far can I drive on my reserve tank.Ford Bantam,2004 Rocam,1.6L 1 Answer

    How far can I drive with my Ford Bantam 1.6L Rocam after my fuel tank light comes..reserve tank capasity - how many km can I do on my reserve tank ?

    1995 Ford Bantam

    -

    Maintenance & Repair

  • Ford bantam not cranking 1 Answer

    Hello, I have a ford bantam 1.3 rocam and every time it rains it wont crank at all.

    Ford Bantam

    -

    Maintenance & Repair

  • ford bantam rocam not starting 2 Answers

    my bakie i have remove the engine to seal the leaks on oils but now when i replace it there was no spark fuel is not coming oil light and bettary light also not showing

    1995 Ford Bantam

    -

    Maintenance & Repair

Shortcuts

Search Ford Bantam Questions

CarGurus Experts

  • #1
    Guru97FK8
    Reputation
    15,620
  • #2
    MrRocket12
    Reputation
    1,150
  • #2
    Janus Welgemoed
    Reputation
    1,150
View All

Find great deals from top-rated dealers

Search

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.