Engine swap no crank no start
Swapped a b18a1 into my 97 civic hatchback, will not
crank or even click at main relay. Asuming its something
problematic due to going from obd1 to obd2
Do you have a large ground from the a engine and transmission bolt to the body? If not use a booster cable to hook it up temporarily. You can swap obd1 and 2 computers back and forth with adapter harnesses for the ecu so I doubt the main wiring harness is the problem, you've probably just missed something small yet important.
Swapped a b18a1 into my 97 civic hatchback, will not crank or even click at main relay. Asuming its something problematic due to going from obd1 to obd2
Honda Civic Hatchback
-
Car Customization
I have a 99 Honda Civic inside I did a engine swap with a JDM b16a I have changed everything on the fuel system new throttle body sensor basically everything under the hood is new car will start r...
1999 Honda Civic
-
Car Customization
i have a 1989 honda accord lxi and was wondering if the vtect f22b would fit in it without needing to relocate the engine mounts please let me know if it can be done or if i need to get new mounts mad...
1989 Honda Accord LXi
-
Car Customization
Hello guys I have a 2001 honda civic ex 1.7 liter D17a2 engine. right now the stock engine is pushing 127hp it has about 150,000 miles I know a good engine swap for it is a K20 but I'm looking to sw...
2001 Honda Civic Coupe EX
-
Car Customization
What would be the best engine to swap out for my Stock 1.7L that's currently in my car
2004 Honda Civic Coupe DX
-
Car Customization
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.