2003 passkey 3 Buick Rendezvous no crank no start
Asked by Michael Aug 20, 2016 at 02:49 PM about the Buick Rendezvous
Question type: Maintenance & Repair
03 buick rendezvous had a weak batery, and parked it for 3 or 4 week, (no i did
not undo the negitive ). Of coures im at a stand sill . I have tried the relearn
procedures and purchashave also bought a good used bcm.any help would be
appreciated. Thank you .
Michael
Best Reards
10 Answers
I apologize hopefully I didn't reply twice. I did starter first and then I put it back on the vehicle and was able to jump it with a screwdriver with the key on I don't know when it would start for a second then shuts right down . I did try to start it in neutral and that didn't work . What is your thought on tracking the passkey 3 security anti-theft wire down in between ignition switch and the neutral position safety switch and jump on it right to the other side of the PCM? Thanks Michael
Hope you can understand stand that . I was using talk to text "
Jim, thank-you for your response. I had to step away from the project for a day or two. I had to finish some other priorities. Anyway I do not have a clicking noise from the solenoid. But when I Pull the relay and jump it the vehicle will start for two seconds then die. Also I have removed the steering column cover and around the ignition switch there is a thin rectangle box with a hole at the top slipped over the ignition cylinder and it reads pass key lll . The key is labeled (pk3) below the plastic on the key.
Okay are you familiar with Solaris Pro Snap-on. I have one, I've only used it to troubleshoot sensors and mess with airflow mixture and regulate the injector pulse. I guess my question is if I got a used one I should be able to reprogram that with that tool
Thank-you for your help
Jim where you at buddy. I was still picking your brain. I need suggestions. Any one else have and advice
I have put it back insane result. I hate to take it to the dealer. I think I will look at the ignition switch. Buy a new one or check for a recall . Then get back to you . Before u buy a new pk3 modules. thanks
Morgan7319 answered 7 years ago
Its a fuse. Inside fuse box .i want to say #29 or 31. Right around there. Just check allbthe fuse that have passkey 3 or bcm in them. If you google the fuse box it will tell you which is what. Because i know my. Rendezvous doesnt have it on the cover of the fuse box. Change the fuse and problem solved.
I am having the same issue with my rendezvous, did any of the above work?
