I transfered a 2005 to 2004 it fit now it won't start any ideas
I transfers motor from a 2005 to a 2004 Ford
escape every thing fit but now it won't start has
good compression turns over but nothing any
ideas why it won't start
There is something different between 04 & 05. Most likely tone wheels are different for crank and cam sensors. 04 and 05 do not interchange according to Car-Part.com.
VRoom12345 answered 2 years ago
if the starter cranks, you need spark and fuel. test for those next. Attach all your grounds?
I transfers motor from a 2005 to a 2004 Ford escape every thing fit but now it won't start has good compression turns over but nothing any ideas why it won't start
Ford Escape
-
Maintenance & Repair
I take great care of this vehicle, it has been maintained according to the Maintenance Schedule I rec'd when buying the SUV in 2007. Never been in an accident. My Ford Escape stalls out when at a ...
2006 Ford Escape XLT FWD
-
Maintenance & Repair
My Ford Escape 2012 w/oem remote start only stays started for 5 minutes. It shuts down then. If I try to restart it, the car goes into anti-theft mode and I can't retry for over 5 minutes....even With...
2012 Ford Escape XLS AWD
-
Maintenance & Repair
I HAVE A 08 FORD ESCAPE AND SOMETIMES IT TAKES SEVERAL TRYIES TO GET IT TO START AND ITS A STANDARD. WHAT MIGHT BE WRONG WITH IT? I BELIEVE IT IS FUEL INJECTED IF THEY MEAN SOMETHING?
2008 Ford Escape XLS FWD
-
Maintenance & Repair
jammed that one. Now what? to do. I have two back door that will not close.
2006 Ford Escape
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.