2002 Ford Explorer replaced the auto temp climate fan resistor
I replaced the auto temp climate fan resistor and it still only works on high what else can
I try
If you get no fan speed at all on any of the positions except high then it is a sure sign the resistor is bad. On the high position no resistance is supplied by the resistor and the current flows unrestricted to the motor. If you can take the system out of auto temp mode try that. Also, use an multi meter and check for voltage to the resistor at each of the fan settings manually. If there is no current supplied at the lower settings the selector switch is bad.
I replaced the auto temp climate fan resistor and it still only works on high what else can I try
Ford Explorer
-
Maintenance & Repair
My 2002 Ford explorer went off the road and bounced around and turned off and now it cranks but won't start. Can someone please tell me what the problem is?
2002 Ford Explorer Sport 4WD
-
Maintenance & Repair
I had my transmission on my 2002 explorer replaced 6 years ago for 3500 dollars. It’s now slipping again. Is this normal? How long should a transmission last?
2002 Ford Explorer
-
Maintenance & Repair
I have a 2002 ford explorer 4.0 v6. It's been sitting for 3 years before I was able to get it worked on. I recently had the head gaskets changed,fuel pump, the timing chain reset,and fuel pump rela...
2002 Ford Explorer XLT 4WD
-
Maintenance & Repair
How do you check the fan clutch and water pump output on an 02 ford explorer?
2002 Ford Explorer XLT
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.