Scraping grind from front drivers wheel,already replaced wheel hub and cv shaft

Scraping grind from front drivers wheel,already replaced wheel hub and cv shaft 2 Answers

wheel bearings on front 1 Answer

How much should I expect to pay for front wheel bearings? And do you need to replace both if only one is making noise. The one needing replaced is on the same side as the cv joint that they say n...

2007 explorer humming noise from wheel---bearings replaced and new tires 3 Answers

Had bearings replaced and new tires. Have a noise/sounds like excess road noise at 62 mph but ok at lower speeds. Any ideas?

i am having a problem with my 1996 ford explorer.when i put the transmission into gear and the car starts to move it makes a loud shaking and clanking noise in the left front end.people are telling me its the hub and knuckle but when i took the tire off i pushed the rotor around and it sounds like it is coming from the shaft after the knuckle can you tell me where to look 1 Answer

i have a 1996 ford explorer and i am having a problem in the front end.when i put the transmission into gear and start to drive there is a loud noise coming from the left front end.if i stop it goes a...

CV shaft 1 Answer

What would make a CV shaft keep popping out of a rear end