Location of keypad entry module for 2010 Explorer sport trac

Thank you.

I don't know for sure but I DO know that the Crown Victoria's had the code on the module which was mounted behind the driver's door panel. I would probably call your local Ford dealer and ask a service advisor to make sure but the dealer will probably look behind the door panel for it anyway. Kenny..

Ok, I could be wrong about the door panel. These answers were posted about 4 months ago so maybe you should check these places out first before going to the dealer. Let us know what you find. Kenny. #1 If it is a Gen 1 you have to pull up the vent panel of the dashboard and peep through the windshield above the passenger side airbag. There is a sticker on a cream colored box with the code on it. Mark helpful .. #2 WRONG,it is at 1 of 2 places,open rear hatch,look on both sides if not their,pull down carpet at brake peddle,you will see it on the modgel,is a small white sticker with black numbers,this is the code,it is NOT reprogramable.this is the only 2 places ford puts the code. 1 out of 1 people think this is helpful. Mark helpful .. #3 We are talking about a Sport Trac, NOT a regular Explorer. Sport Tracs do not have a "rear hatch". I have read a project on another Sport Trac website that has pictures and shows exactly what I am talking about.

Thanks

Hi It is not on the 2010 Sport Trac. I went to the Dealer and had to pay $55.00. Thanks, Joel

TRY PASANGERS SIDE BACK DOOR BEHIND SEAT BELT COVER THE LOCK MODUAL ID THERE AND ON A WHITE STICKER IS THE CODE