how hard is it to change the fuel ejectors in the 1999 f250 7.2 desil
my truck will lope when in idle or stopped but it doesn't do it all the time.
It is not terribly hard. Just make sure all the o rings stay on the old ones when you pull them out and put them back on the same color, same place when you install them back. I would replace the wiring harness and valve cover gaskets under the valve covers first. These go to the injectors and are known for going out.
my truck will lope when in idle or stopped but it doesn't do it all the time.
Ford F-250 Super Duty
-
Maintenance & Repair
Serviced 1100 miles ago. Its been a year. Do I need to change oil yet?
1999 Ford F-250 Super Duty XL 4WD Crew Cab LB
-
Maintenance & Repair
2001 f250 5.4 as of tonight it started cutting out or to me acting like fuel starvation under load. This gets worse in just minutes, but if I shut off the ignition and restart immediately it has fu...
Ford F-250 Super Duty
-
Maintenance & Repair
I have a 2004 F250 gas. It starts with starting fluid in the air cleaner and shuts off right away. It will not start without it. I replaced the fuel relay fuse and the safety shut off switch on the pa...
2004 Ford F-250 Super Duty XL LB RWD
-
Maintenance & Repair
How do I access the turn signal flasher relay on a 2000 F250 super duty truck?
Ford F-250 Super Duty
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.