1997 Outback 2.5L DOHC - Valve Adjustment Procedure
Has any out there had experience with doing a valve adjustment (shim and bucket
style) an a 2.5L DOHC? Is the spec tool required as is being said in the Haynes
manual. Thanks
Has any out there had experience with doing a valve adjustment (shim and bucket style) an a 2.5L DOHC? Is the spec tool required as is being said in the Haynes manual. Thanks
Subaru Outback
-
Maintenance & Repair
My mechanics are having to replace the wiring which burned when the 97 Subaru Outback's 2.5L DOHC engine's head gasket blew. They're wondering if the wiring harness and computer box from a 2.5L DOH...
Subaru Outback
-
Maintenance & Repair
I rwplaced he o2 sensor upstream and the code went off then back on again both times a constant check engine light with a flashing cruise control light. It is good for about a day then comes back o...
2005 Subaru Outback 2.5 i Wagon
-
Maintenance & Repair
2000 outback 2.5L. Fuel pressure at 37psi at idle with vacuum connected. Book calls for 30-34.Could higher fuel pressure be causing a lot of intermittent hesitation during acceleration?
2000 Subaru Outback Base Wagon
-
Maintenance & Repair
My 1997 Subaru Legacy, has aluminum wheels and spent a lot of time in Oregon. It makes a rub, rub noise when driving. It lessens when turning.
2000 Subaru Outback Sport Wagon
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.