How do you get the rotor off?

Asked by zorro469 Nov 15, 2009 at 02:34 AM about the Acura Vigor

Question type: Maintenance & Repair

I can't get the assembly off to remove the rotor.

2,695

Tom answered 14 years ago

well removed the caliper. then you remove the caliper bracket usually 2 bolts that hold it in. then depending on vehciel 1-2 screws holding the rotor onto the knuckle

1 people found this helpful.

Mark helpful

165

Angel123 answered 11 years ago

after taking off your guide pin bolts (x2) , and your caliper bracket bolds (x2) you will need to unscrew your rotor/disc retaining screw (there is only one and it requires a phillips head screwdriver once unscrewed the rotor should come off the hub. if not a little love smack using a rubber hammer should do the trick ^_^ hope this helps

Mark helpful