i have an eg and i tried for a hour to remove the pulley bolt, not the belt sproket to change my belt. i tried using a 1/2" drive impact gun and also used a breaker bar with an extra long cheater bar. Any suggestions, please?
r u talkin abt the cam or the crank ??if the crank u r talkin abt so u should use a puller and spray WD40 , DONT heat it up coz u may screw the crank seal try it and let me know
thanks for the tip, but i took it off by jaming the flywheel and using a cheater bar. btw wd40 wont work 'cause it only lubes the outside, not the threads.
i have an eg and i tried for a hour to remove the pulley bolt, not the belt sproket to change my belt. i tried using a 1/2" drive impact gun and also used a breaker bar with an extra long cheater bar....
Honda Civic
-
Maintenance & Repair
It has 111K miles and I think it needs to be done soon. There is a loud high-pitched noise under the hood every once in a while...is it related?
1998 Honda Civic DX
-
Maintenance & Repair
what rate is the timing supposed to be set at for an 89 honda civic hatch back the stickers have been taken off my car by a previous owner and i cant find these answers anywhere without paying for the...
1989 Honda Civic Hatchback
-
Maintenance & Repair
Of course things are gonna move a little , seems drastic out of time,maybe I wasnt carefull enough to keep timed, run through timing pulley marks , T>D>C
1987 Honda Civic Wagon
-
Maintenance & Repair
98 CIVIC at what km. should timing belt be changed
1998 Honda Civic
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.