Cannot locate the A/C charging port on a 1999 Chevrolet Lumina. Can you tell me where to find it?

This should be it ...click on it

is that how you look H25? all beamin' with the right answer.?

Low pressure side re charge port?

JUSTANSWER.COM ----- " Step by step how to charge A/C unit 1999 chevy lumina " ----- http://www.justanswer.com/chevy/2506h-step-step-charge-a-c- unit-1999-chevy-lumina.html ----- WITH AN AC MACHINE: ----- hook up the low side connection under air filter housing ----- recover anything thats in it. ----- vacuum system for 30 min. ----- recharge to capacity. should be on sticker under hood ----- SHADE TREE METHOD: ----- buy a couple cans of r134a from local parts store ----- preferably with a gauge connection ----- remove air filter box ----- connect fitting on hose (the smaller connection of the two) ----- start engine turn on a/c let it suck out of the can ----- watch pressure should go to about 35psi depending on temp outside ----- if pressure is going lower too fast put other can. ----- YOUTUBE: ----- http://www.youtube.com/watch?v=JBMaMNu2khk ----- YAHOO ANSWERS: ----- http://answers.yahoo.com/question/index? qid=20090617150512AA6pW3k ----- "Best Answer - Chosen by Voters look under your aircleaner box it is the larger pipe of the two ac lines both service ports are in the same area so make sure you get the biggest pipe that is your low pressure port for charging hope this helps ----- Source(s): 25 yrs,gm tech" ----- ANSWERS.COM: ----- Where is the AC recharge port on a 1999 Chevy Lumina? ----- http://wiki.answers.com/Q/Where_is_the_AC_recharge_port_on_ a_1999_Chevy_Lumina#ixzz2YqHdCrSz ----- FIXYA ----- http://www.fixya.com/cars/t5649568-low_side_service_port_ac --- -- Where is the low-side service port for AC on a 1997 Chevrolet Lumina? ----- 2CARPROS ----- http://www.2carpros.com/questions/1997-chevrolet-lumina-air- conditioner-low-pressure-port-location ----- "It's on the accumulator which is under the air filter box."

Just wondering, will the fitting to charge the ac system fit on the wrong (high pressure) port?