I don't know how someone would know, your ECU had bad continuity unless they were under there with the harness unplugged. if your contacts are in fact bad find the harness and unplug then replug your sensor wires. if you unplug and try scraping around in there your probably gonna mess something up. that's what i would try first. then if that docent help go talk to the dealership.
No problem with shifting or engine missing! The light just stays on. Was told contacts or something in the transmission was dirty. What's the fix on that?
Chevrolet Silverado 1500
-
Maintenance & Repair
Hi i have a 2001 chevy silverado with a 4.8 engine my problem is that i am getting current to the driver side of the injectors but all four injectors on the passenger side are not. what can it be?
2001 Chevrolet Silverado 1500 Extended Cab 4WD
-
Maintenance & Repair
All fluids are good, temp is good and the motor sounds good,, anyone else have issues with the oil pressure Sensor? The code I got from the guy at Autozone is P0521,,,,, anyone else have this problem?
2012 Chevrolet Silverado 1500 LTZ Crew Cab 4WD
-
Maintenance & Repair
Has a misfire on # 7 cylinder of my 2006 chev Silverado 4x4 with a 4.8 engine
2006 Chevrolet Silverado 1500 Work Truck Extended Cab 4WD
-
Maintenance & Repair
My transmission shut down and would not move. I checked the transmission fluent and was very low. I fill it and after the motor cool down, I started the truck and it drove for about five minutes and...
2005 Chevrolet Silverado 1500 LS Extended Cab RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.