Depending on which year, some might. However, I would not recommend putting 1/2 ton parts, especially suspension parts, on a 3500, (it's a 1 ton, by the way), unless it is a very temporary fix and the truck won't see heavy work until stock or better parts are put on.
my suspension is a 3/4 ton by the way. my truck is a 1990 gmc 2500. the only thing is one ton is my cab.
will 1/2 ton front end parts will work for a 3/4 ton front end? like the a-arms and idler arm and pitment arm?
Chevrolet C/K 3500
-
Maintenance & Repair
will 1/2 ton front end parts will work for a 3/4 ton front end? like the a-arms and idler arm and pitment arm?
Chevrolet C/K 2500
-
Car Customization
Won't shift out of 1 St gear. Speedometer works, full of fluid, even changed filter, also fluid in transfer case. Please help. I have a grand in it just this week. Has 4L80 E IN IT
1997 Chevrolet C/K 3500 Cheyenne Crew Cab LB 4WD
-
Maintenance & Repair
I have a 1996 4x4 1 ton chevy with a 454 and a 4l80e some people tell me I have to get a transmission from the same year with the same engine is this true ? Or can I take a 4l80e transmission from...
1996 Chevrolet C/K 3500 Cheyenne LB 4WD
-
Maintenance & Repair
will 1/2 ton front end parts will work for a 3/4 ton front end? like the a-arms and idler arm and pitment arm? for a 1990 gmc/chevy 4x4
1990 GMC Sierra C/K 3500
-
Car Customization
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.