Why is my truck not starting after a new fuel pump was put in

Why is my truck not starting after a new fuel pump was put in 1 Answer

Why is my Kia Rio not starting after I put a new alternator in? 5 Answers

Had old alternator tested and it was bad, so I replaced it with a brand new alternator. Once the new alternator was in, turned the key in the ignition, and nothing happened. The car would not start. T...

I put in a new fuel pump, but the pump is not working. 2 Answers

After putting the pump in the tank, and the tank in the truck, pump does not work. Checked fuse and relay, event checked power at the harness. Removed the tank and new pump and directly connected th...

I installed a fuel pump on my 2002 GMC Sonome engine 4 cyl. It started righd not startet up. But, after driven 2 miles, stalled out and died. Since then I could start only after taking out pump out of tank and reinstalled. Oil pressure is more than 40 PSI. I can not find any voltage from terminal.. I put a hotwire (jumper) from 87 terminal to 30 Terminal in fuel pump relay terminal, still no juice. I put a wire from batter to straight to pump . The new pump made noise . Still could not start. In this morning I put a jumper from 87 terminal to pump. I managed the engine running. I could start without jumper about 5 times. While the engine running, I decided to take my truck to road test. Whiel the engine running, I was gathering some tools and equipment for in case of broke down, the engine shut off. Why does my truck do this? I need help, please. 3 Answers

I installed a fuel pump on my 2002 GMC Sonome engine 4 cyl. It started righd not startet up. But, after driven 2 miles, stalled out and died. Since then I could start only after taking out pump out of...

Not starting after putting on new fuel pump 1 Answer

I put on a new fuel pump on my 95 eclipse gs but it's still not starting and I'm not sure what's wrong