year 01, not getting power when accelerating, had to put on blinkers and move to slow lane... after about 10 minutes, it seemed to power up/speed up just fine. Engine light and vcs lights are on

Asked by soupieh Mar 05, 2015 at 06:30 PM

Question type: Maintenance & Repair

the engine light and vcs lights have come on periodically for a year, was told it was due to a pinhole leak in exhaust, so I'm thinking it's not related to the acceleration and low power when accelerating.

FordNut answered 9 years ago

You need an OBDII scan, too much guesswork here. I can tell you Toyota and Lexus are notorious for the VSC and Trac light to come on whenever any DTC code is thrown. And probably not pinhole leak in exhaust, but rather EVAP. But still, that would not cause what you describe, but will light CEL. Really do need fault codes, some parts houses will scan it free

1 people found this helpful.

Mark helpful

Guru94CHZR answered 4 years ago

How to fix pinhole leak and exhaust of Lexus RX 300 2001 model?

Mark helpful

Your Answer:

year 01, not getting power when accelerating, had to put on blinkers and move to slow lane... after about 10 minutes, it seemed to power up/speed up just fine. Engine light and vcs lights are on 2 Answers

the engine light and vcs lights have come on periodically for a year, was told it was due to a pinhole leak in exhaust, so I'm thinking it's not related to the acceleration and low power when accelera...

Lexus

-

Maintenance & Repair
my lexus rx 300 just stopped picking speed suddenly. somehow was a able to get the car on the side and got it towed. CAR starts up just fine but doesn't move when accelerator is given 1 Answer

my lexus rx 300 just stopped picking speed suddenly. somehow was a able to get the car on the side and got it towed. CAR starts up just fine but doesn't move when accelerator is given

2000 Lexus RX 300 FWD

-

Maintenance & Repair
Hi, my Lexus gs300 will not crank and start after being fine when parked up the night before. The radiator fan will kick in when ignition is on but engine will not start. Check VSC has come up. When diagnostic laptop attached it is unable to connect to the ecu for fault code. All very strange as all fine when left last night. Checked fuses, security light flashing and battery ok. Have you any ideas please. Thank you lee 3 Answers

Hi, my Lexus gs300 will not crank and start after being fine when parked up the night before. The radiator fan will kick in when ignition is on but engine will not start. Check VSC has come up. When d...

2005 Lexus GS 300 RWD

-

Maintenance & Repair
I had my airbags replaced and the entire dash board of my car replaced. When I put my car in the shop there was nothing wrong with my car before I put it in the shop. Now in less then a week after getting my car out of the shop my VSC light and check engine light came on and will not go off. Does the repairs have anything to do with these lights coming on? In addition, when I got my car back my gas cap and trunk would not open using the button inside the car. 1 Answer

I had my airbags replaced and the entire dash board of my car replaced. When I put my car in the shop there was nothing wrong with my car before I put it in the shop. Now in less then a week after get...

2008 Lexus ES

-

Maintenance & Repair
I have a 94 Lexus, recently i left it on E for 5 days sitting in the sun, i went straight to the gas station when i started it and the acceleration was slow, i put gas and it was fine for a week. 10 Answers

Now after a few minutes of driving it shuts off at a stop sign or light, and won't go when i start it up again, just shuts off immediately. I had a mechanic come over and couldn't diagnose because...

1994 Lexus LS 400 RWD

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.