can't get the wheel studs to go in all the way!

should be able to just put the tire on and draw the studs through the hub when you put the lug nuts on

Hey Daniel, thats' bad advice. What hapened when dud have to take wheel (s) off in case of flat tire. It would take Hercules power to do that. Find exact tread pitch and retap it nice and slowly. Clean treads and dont try to go all the way in one shot. Go half turn, back of ,clean it (hole) and or blow it with compresed air. Patientce here is key issue. Good luck and no beer before job is done. Cheers

its not bad advice Steva its how its done less im misunderstanding his problem, and retap what hes trying to get his new wheel hub stud back through the hub all I told him to do would just pull it into the hub its not gonna make it hard to take the wheel off,, you don't thread the stud into the hub its pressed in, Steva you sir don't know what the hell your talking about, much like you didn't know what you were talking about with the O2 sensors but I did didn't I lmao

heres some video aid for ya steva and for nbillin as well,, can also be don't by just putting the rim on the hub and drawing them in with the lugs as I originally stated www.youtube.com/watch?v=VHM6mFbKG9c

notice the ribs at the back end of the studs their NOT threads soooo nothing to strip out and has nothing to do with removing the lugs down the road pal

notice the ribs at the back end of the studs their NOT threads, they work/act like tongue and grooves, soooo nothing to strip out and has nothing to do with removing the lugs down the road pal but you would want to make sure the tongue is in the groove before you started drawing them in though, any crap that might be in the groove will be pushed out by the tongues

I didnt have video to see it, ok Daniel. I have proposition to make to you how about if we have friendly chat with beer maybe somwhere.?

steva I don't have a problem with you lol ,,, but ever since you stuck your nose in on the O2 problem that girl was having and thought ya knew what ya were talking about and gave bad advice to her and I ended up being correct you thought you needed to pop in on this one and prove me wrong here which again you got shut down on cause again you didn't know what you were talking about and tried to prove me wrong,,, its cool just stop trying to prove me wrong and your cool lol by the way watch that video and learn something