1986 iroc problem
Asked by maddog Nov 10, 2007 at 10:17 PM about the 1986 Chevrolet Camaro IROC-Z Coupe RWD
Question type: Maintenance & Repair
i just bought a 1986 iroc z with a 305 tpi with a few mods it has a k&n and a edelbrok intake i have been having problems with it when i go to stand on it,it just stumbles and starts to die i have replaced the ecm maybe 6 times in the past 2 months and just replaced the prom in it is there anybody out there who has had this problem before and knows how to fix it i have been ran around buy many people saying they can fix it but no luck i bought the car for 3k cash and have thrown another 750$ in the past two days with no results
7 Answers
on the tuned port injection .finding a intake is almost impossable it is best to leave these engines alone.ps i have a 305 tpi engine ant trans with under 200 miles on both trying to sell need the room in my garage .engine is stock but every part is new down to knuts and bolts,have almost $4,000 in both will take $1,500 for both.is 1986.
littlehorn answered 17 years ago
6 ECMs in 2 months?? You are a glutton for punishment, for sure. Try finding a stock intake and replacing it with that to see if that is part of your problem. You may have a vacuum leak or other problem with the setup. It may also be the throttle position sensor or another issue. You need to get back to basics with this one -- perhaps fuel pressure is a problem, or distributor -- losing spark under load.
ghostrider answered 16 years ago
There is Way too many possible problems that can occure when you start changing parts on a TPI motor. First of all, you got like a million censors, not to mention the EGR, chances are, it was blocked. I had an '86 with the LG4, with the 4 barrel Quadrajunk, And it was my first Z28, so I thought I could start pulling all the pollution shit off, put a Holley on it and found out the Hardway that you can't do that kinda stuff. Six ECM's seems crazy, did you put it on a computer? I actually never heard of a manifold that would work with the throttle body, an plenum. Put the stock one back, or Buy that guy Papa's motor, thats a good price...
if instred e-mail papawaynesc@yahoo.com i am in martinsville virginia,like it said under 200 miles on engine and trans.may drop price.need the x-tra room in garage.
do you know about new TBI unit working good while in neautral or park but chokes out when iput hur in gear and dies
Have 90s model 350 cu tpi has been running ok until starting cutting out under load. Have had trouble with starting. Crazy but I try starting 3 or four times then pump foot peddle and is starts. Now no fuel to engine. Put 12 v to tank fuel pump, it pumps fuel and starts. Wire going to fuel pump no voltage. Fuse is good, is the hot wire to fuel pump controlled by computer. Phil okcff70@gmail.com
