86 Camaro Not Starting
Asked by l1ttlesully Sep 11, 2015 at 09:17 AM about the 1986 Chevrolet Camaro Coupe RWD
Question type: Maintenance & Repair
I have an 86 Camaro with a V6 2.8L engine. It was driving fine and is in good
condition. I was driving it recently and when I went to start it up again the
same day, it wouldn't start. The battery turned on but the engine would not
turn over. Any thoughts on what I could do to fix this?
12 Answers
I assuming the car is not cranking correct? if that's the case take a look and make sure you have 12 volts at the battery, check all the connections including the ground. If that OK lets move onto the neutral safety switch, then you can check the ignition module, if they check out OK check any and all fusible links, If that is working check the fuses for the ECM to see if they tripped. Check to see if the starter relay is good. If that checks good if you have a security system you may want to take a loo at that...
l1ttlesully answered 9 years ago
A little more info. It is a manuel, and there is no security system. All the fuses look fine.
Rhodes2345 answered 9 years ago
dose it click or anything when you try to start it? it could be a starter have some one turn the key to crank at the same time hit the side of the starter with a hammer see if it cranks.
l1ttlesully answered 9 years ago
Yes it clicks when I turn the key. I will try the hammer thing and give an update when I can.
l1ttlesully answered 9 years ago
I tested the starter solenoid and starter motor and it all works fine. We were even able to push start it. But it is still not working. My new thinking is that it's the ignition switch. I tore apart my steering wheel column and tried to find any loose wires or something but it all looked fine. I couldn't however find my ignition switch.
Rhodes2345 answered 9 years ago
The ignition switch is down the column on the top if you turn the key with your other hand on the column feel for the rod to move it is at the end of the rod also a lot of wires going to it. You might also check the nutrel safety switch
I have a 86 z28 it will turn over but not start it get spark and gas but I have no clue of what's going on I wish I had help and info of what I can do so I am teaching out to y'all to try to please give me info on this I have never had a car that did this before so anybody's info would help thank you all and god bless and to the person who I commented on the his post I am sorry that I did kno how to post anything on here
i have a 1986 camaro my car wont turn it was working fine earlier when i turn the key doesnt click and the battery works fine it just two months old cold it be the ignition cylinder a friend of mine tells me its the swtich
My son purchase a 86 Z28 A few months back, It drives awhile but once he turns it off it won't start again , Just picked it up from shop getting a fuel pump but its up to its old tricks not starting ... what else can cause this problem ...