Hello I have a 2007 Corvette C6 my problem is when I put the clutch in and drive it make a lound whinning noise the i let the clutch out it doesnt make it anyone know what that might be. Thank you

Hello I have a 2007 Corvette C6 my problem is when I put the clutch in and drive it make a lound whinning noise the i let the clutch out it doesnt make it anyone know what that might be. Thank you 5 Answers

Stalling when hot... My 1967 427/400 Hp L68 Corvette stalls when I drive it for approx 15 to 20 minutes after a short time it will start back up and do it again. What is the problem? When it run is runs very strong. 6 Answers

My 1967 vet stalls after driving it for approx 15 minutes. If I wait a few minutes it starts back up only to repeat the problem. It has 3/2 barrel Holly carbs and they have been rebuilt. Can it b...

I have an 81 corvette w/43k miles. Excellent /original cond. I had it stored for 18mths. I heard a knock in it and dealer says the cam shaft needs repair. Is this worth it? 16 Answers

hello sir, I have a 1981 corvette. It is all original with about 44k miles on it. I had it stored for about 2 years. I took it to the dealership for an oil change and I heard a knocking in the moto...

I have a 1969 Chevy Corvette. I have rebuilt or replaced almost every thing. I have not replaced the original A/C compressor but converted it to the new Eco friendly freon. I had it tested three times, had the cooler boxes cleaned out, fan replaced, yet I have trouble getting the car cool. I live in So. Cal. where it is a necessity of life to have the A/C work as good as when new from the factory. I put in heat/sound shielding under the floor mats, and had all components check for proper functioning. I was thinking of going to a serpentine belt system that would get the newest A/C compressor with the system. Has anyone done this or have any suggestions? 9 Answers

The A/C system does not leak, holds the proper pressure

I have 1984 Chevy corvette left to.me .the motor is now a 355 Chevy carb.still had digital dash that lights .but no read out and I noted had no ecm module does anyone know where it how I can get a dash for this t. Lost in I don't have a clue land 1 Answer

84 c4 dash cluster light's no read outs of any kind. Owner before changed stock ing motor, and put in a Chevy 355. I haven't clue which way to turn to have read outs on my dash cluster. If anyone ...