How do I reset the window controls to allow operations from the drivers seat? The lock out button seems to operate OK. But unable to control other windows.

This happened to me after disconnecting battery, panicked a bit. Raised and lowered each window individually a few times, and it fixed itself. Not sure what is the combination that did the trick.

Turn the ignition on first. Like Jose said, from each door lower the window then raise it. Repeat this twice and you will be all set

I do have the same problem with my 2009 RX 350. This does not help and other windows won't operate from the driver seat....:( HELP please!!

Go to the LR door and lower the window all the way and then raise it all the way. Do it twice and then check the automatic function from the switch in the LR door. When the auto function is initialized the LR window should now work from the drivers master switch. Repeat for 3 other windows.

It is not helping. Is there any other posibility od fixing this ??

Fully lower and raise the windows until the indicators become solid (not flashing), you will regain the control from driver window control panel.

my window was fix, after turning on vehicle and winding down the window one at a time and up, and then use driver door window control to operate. my problem was fix, thank you

Same here - replaced dead battery - all windows stopped working but the driver's one. Turn ignition ON - no need to turn the engine on. One time full down and full up was enough for each window (from its own door control) but the driver's one. Had to do the driver's window down/up several times to get the button green LED to stop blinking and regain full auto function.

It work for my RX400H, thank you guys very much.

unable to turn rear windows down from any control position> i just replaced dead battery to new one.

Can't believe thats a Lexus fix but from an import technician it is the fix.

I followed a combination of instructions from this site. I opened and closed each window individually, leaving the driver's window open while doing the others. I then closed and opened the driver's window again and voila, the central control worked. Thank you all....as I was dreading another trip to the dealership!!!

well 3 of them work! now the passenger window won't go up or down with the master control

Just fixed the same issue on a 2004 RX330 ~ worked quickly on rear windows, took several times on front passenger window, but it fixed it THANK YOU!

I immediately was able to open/close the LR and RR windows from the FL (master) control after completing the instructions above. However, I still have been unable to get the FR (passenger) window to open/close from the master control after several attempts at going through the entire process :( 2006 IS350

UPDATE: I got instructions from here and it worked like a charm. None of my button/switch lights ever turned on or blinked though: http://www.clublexus.com/forums/is-second-generation/291026-electrical- help-windows-won-t-roll-up-after-battery-disconnect-2.html 1. Turn on ignition and open driver side front window halfway 2. close driver side front window and hold switch for 1 second 3. have a look at the other door window switches (they should be flashing) 4. repeat same procedure with other 3 window switches

It worked for me, thanks guys (Lexus rx 350)

Turn on the ignition, lower all the way the window you want to fix, raise all the way up, keep holding the switch until the light stay solid. Fixed!

Wohoo. I panicked we replaced our battery last night and my windows would now roll up or down from the drivers side. Followed the steps above and they are working!! :) :) Thank you!!!!!!!!!!!

Had the same problem, here's what worked for me. Held each individual button in the up position for 20 seconds and when released window will stay in the up position. I then let down and back up and problem solved. All working properly now.

I think all of these things work. I tried the one where the driver's door is lowered and raised, then tried each of the other doors, and they all started performing correctly. This was after the Toyota dealership replaced the battery and did not check the windows. Bob Osborne, Longview, TX

Thanks guys it worked!!! 09LEXUS RX 350 Weird but that's the trick.

It worked perfectly for me. My battery died and had it recharged. The driver side window worked but not the others. So I put the engine on, lowered raised the other windows 3 times for each window....like magic, everthing worked thereafter .Thank you guys for the advice.

I jumped my 07 Lexus gs350 now my conditioner it's the working display says (check the connection to the air conditioner) my outside temperature isn't displayed anymore and audio and climate controls does not display

08 RX350 - Thanks guys. Replaced the battery and could only operate the windows from the Driver cntrols. The above instructions made it a breeze to correct. Thanks!!

Same window problem after replacement of the battery and the windows were reset based on the suggested procedure. Thanks!!!

2004 RX330 here. After my wife drained the battery, we lost master control from the drivers seat, we also lost the auto function on all windows. None of the ideas above worked for me. Tried the up and down 3 times, as well as the driver, passenger, passenger rear, driver rear, sunroof order thing. What fixed it for me was in the manual, roll each window down half way, then roll it up holding the up button for a second after hit hits the top. After doing this, the auto feature on all windows was fixed, and the master control started working as well.

I have a problem is just i try everything my windows won't go down when they want to go down they stay down have to be there half an hour playing with the controls until it goes up and also my AC don't work when the windows wanted to go down the ac starts working

Procedure worked on the inside Windows, but the hatch Back door pwr. Door dose not work, from inside nor the remote key any one have suggestions, or a fix. Thx

is the door power switch in the glove box on or off?

Thanks all you guys. It worked!!!

Thank you so much, it worked like a charm.

Thanks very much! It do helpful for my 2005 Lexus RX330!

Thank you I did have to put the windows up and down several times. Before I got all to work.

The above instructions work. I have a 2004 RX330, followed the instructions, got the rear left and right windows control back, but had to try the passenger side multiple times. At one point after holding the driver window switch up for 20 seconds, the driver window opened about an inch then stopped, but I waited about a min and tried it again and it worked. For the passenger side, here's what I did: 1. Ignition key on (don't have to start the engine) 2. Lower driver window all the way down twice 3. on the second time raise the window closed and hold the switch up for 20 seconds 4. operate the passenger window from the passenger door switch full up and down twice then try passenger switch from the driver side console 5. You should be able to now operate the passenger side window from the driver side console. 6. If it doesn't work, try the sequence again. It may take a few times for the car's computer to set the memory

Thanks a lot. I did and worked on my 04 GX470.

Same trouble with my 2008 Lexus RX350. The solution "fixed" the back windows on the first try. The passenger window was troublesome. I tried many different combinations. Driver window up, down, midway, then cycle passenger window from the the door control up, down, midway. Cycle back windows. After about twenty tries, the passenger window finally worked from the drivers door controls. I'm not sure which combination actually did the fix. Just keep trying.

hi, I had the same problem, and after reading this, I tried on my car, and it solved all 4 doors. thank you very much :D I just tried 2-3 times on each window and the master can then control all of them. very happy. :)

I have Lexus Rx 2008 , the windows and lock button not operating .can not open or close the windows or luck the doors. try all the above answers but did not work. pls advise

what about if none of the windows will go up or down. Yet the moon roof works. I just changed battery

Lexus is250 : Push start button twice but do not start car. Open each window half way then close it and hold button up for 5 seconds.

I just got a 300 H last week, and had this problem. I tried this, and after three times, the front passenger and left rear passenger controls then worked; the right rear didn't. I repeated the cycle 4 times on the right rear, and now they all work. Thanks, folks !!

My 2009 rx350 is totally dead? battery is ok ? any suggestions what that could be?

My battery died from leaving it at the airport for 17 days. Windows wouldn't work from driver side after that. Tried the above mentioned fix of lowering each window and then closing it. It worked! Thank you. My mechanic said I'd be needing a new switch but he was wrong!

the down up system works (sunroof too) but I have one rear window which will not take.... tried swapping switches but only works in manual... no autoclose... any ideas?

it worked! Thanks

Tried all the above hints to no avail on my RX 400. Then I came across the post that said the driver's window must be fully open before you can re-set the other 3 windows. It was easy to re-set the other 3 windows once the driver's window was open. There is a little green light in each door switch which should be blinking if a re-set is needed. (Mine only blinked when the drivers window was fully open) It stops blinking once the re-set is successfully completed

Another chance to "fix" window switches on 2008 RX350 after a battery disconnect. With the ignition on, I twice lowered and raised the RR, LR, then passenger window. All the driver window switches now work.

Thanks so much!! It didn't work for me until I followed the advice that said to lower each window and then raise it and HOLD for 20 seconds. THANK YOU!!!

I have a problem with my IS250 C, the window on the driver's seat doesn't rise or drop after locking or un-locking. Can anyone help

LS 460L - battery was dead, windows needed to be initialized. Repairs didn't work at first until I lowered the driver window and kept it down while raising and lowering each of the other windows. Windows were lowered 5-10 times each before it initialized. They were held in the up position for 3 seconds before being lowered again. The driver window was raised once all windows were registered. Success!

Thank you California43!!! That was exactly fight! Super easy!!

Worked, thanks

The first set of instructions did no work on my 2014 ES350. I tried holding each window switch for 20 seconds with window up and that worked for me. Thanks to all.

After changing the battery for my 2007 RX350 , only the driver window works. I try all suggestions here but no other window goes up or down!!! Lexus should not design their vehicles that way.

My 2004 Lexus RX330 had the same problem. My mechanic said it was a $600+ part and who knows what the labor would be. I just did what was suggested here and it worked! Thank you for saving me $$$$$.

I feel obliged to confirm that the magic worked on my RX350 too. I had to the change my alternator and my windows won't roll down from the driver's control after that. I followed the instructions making sure all windows were enabled from the driver's disable/enable button. Thank you. RX350 pearland, TX

Awesome fix. Thanks!!!

I tried multiple different combinations that have suggested and none of them worked and none of the LED flashed either. I stumbled onto what did fix my windows. I had to go to each window and hold the button in the raise position for about 5 sec. Athen if the window worked in the auto function the window would work from the drives control too. If the window doesn't work in the auto function then it will not work from the drivers control.

Yes it was the new battery that caused a few windows not to roll down. With car ignition on I individually rolled the windows down and it fixed the master control for windows. Thanks for the tips.

I had to up and down my LR window maybe about 7-8 times before it works normal again from the central driver control panel...! Stubborn!!

This worked perfectly for my RX330. I was stressed this it was another issue to deal with but after individually raising and lowering each window three times the automatic function worked and the driver master control worked. Thank you for the help.

Thanks guys this worked after repeated a bunch of times!

This happened to me before, about 3 years ago. I changed the battery of my RX350, 2009. After changing, I the passenger side power window cannot be operated from driver's side button. All I did was raise and lower the from passenger side about 5 times or so. It was fixed. Lately, I changed my battery again. Again, my passenger side power window cannot be operated from driver's side. I remember the "trick" I did 3 years ago. This time it did not work. I thought I just got lucky the first time. Then I read the blog on this site. I went back to my RX350 and did it multiple time, I think over 20 times. Lo and behold, it worked again. This trick really works but we do not know how many times you need to raise and lower the window.

My 2008 Lexus RX400h passenger windows stopped working from the driver window control panel after replacing the battery. However, they did work individually. I tried as an above post mentioned to put the windows up and down 2 times but it didn't work. I tried individually again but 3 times each and it worked.

My 2007 RX350 did the same thing after the battery went dead. Raised and lowered the passenger windows about 4 times and all windows worked from the drivers door again.

Thanks all for this solution shared. I cannot state clearly the roll up and down sequence, but it worked. But I think it was the rear door windows first then the front independently... Thanks once more,

From the window of the door that the controls won't operate using driver door button ,easy fix i literally just did this . All you have to do is lift the switch like u r rolling window up and hold for like 3 - secs and the driver control panel will stop blinking and works instantly after that

By golly yes it did work....been driving me nuts for years. Thanks for the help!

Hello everyone. I have a toyota harrier 2003 which i replaced a new power shutter switch for the right rear and program it and all work fine . But for the key when im locking all shutters automatically closes but not the new replaced side? Any help for this rare scene ?