my 1989 corvette will only start and run if I unplug the MAF , I replaced it and still have the same problem . the car has 7k miles on it . any help would be great .

my 1989 corvette will only start and run if I unplug the MAF , I replaced it and still have the same problem . the car has 7k miles on it . any help would be great . 1 Answer

Stalling when hot... My 1967 427/400 Hp L68 Corvette stalls when I drive it for approx 15 to 20 minutes after a short time it will start back up and do it again. What is the problem? When it run is runs very strong. 6 Answers

My 1967 vet stalls after driving it for approx 15 minutes. If I wait a few minutes it starts back up only to repeat the problem. It has 3/2 barrel Holly carbs and they have been rebuilt. Can it b...

hello again , getting ready to change my thermostat in my 1990 corvette c-4, stock L-98, due to overheating problems. someone told me, it would be ok to put in a cooler 160, rather than the 180, might come on quicker, in traffic, etc. is this a good idea? will it effect other things in the car? can anybody help with this? only had the car a week,and have a handful of issues already, this one, need to fix first..... love the car !! any vette people out there? THANKS, KMAC. 9 Answers

THIS IS A GREAT FORUM, AND BEEN A BIG HELP ALREADY..... THANKS!!!

I have a 1986 Vette, all of a sudden it revs very high and won't go down any. What can the problem be? 1 Answer

My 1986 Vette is having a problem all of a sudden when I start it it runs really.high, 2400 rpms. And it doesn't go down. The only thing I have done is spray some WD40 on the accelerator cable.

I have a 1969 Chevy Corvette. I have rebuilt or replaced almost every thing. I have not replaced the original A/C compressor but converted it to the new Eco friendly freon. I had it tested three times, had the cooler boxes cleaned out, fan replaced, yet I have trouble getting the car cool. I live in So. Cal. where it is a necessity of life to have the A/C work as good as when new from the factory. I put in heat/sound shielding under the floor mats, and had all components check for proper functioning. I was thinking of going to a serpentine belt system that would get the newest A/C compressor with the system. Has anyone done this or have any suggestions? 9 Answers

The A/C system does not leak, holds the proper pressure