i have a 1959 corvette, the car was hit in the rear and needs a trunk floor pan, can i replace sections of that pan ?

i have a 1959 corvette, the car was hit in the rear and needs a trunk floor pan, can i replace sections of that pan ? 1 Answer

where can i buy a new rear trunk pan for a 1959 corvette? 1 Answer

1981 corvette rod knocked a hole in oil mpan car will still run but motor shakes. 1.If a rod is broke or bent and went out the oil pan is the engine junk? 2.Is there any way of replacing just the bent or broke rod that put a hole in the oil pan 2 Answers

Can you take the broken rod out by taking the oilpan off to get to crankshaft to undo the broken or bent rod and can you get to the other end of the rod in the piston? Should the whole engine be rebui...

I have a 1969 Chevy Corvette. I have rebuilt or replaced almost every thing. I have not replaced the original A/C compressor but converted it to the new Eco friendly freon. I had it tested three times, had the cooler boxes cleaned out, fan replaced, yet I have trouble getting the car cool. I live in So. Cal. where it is a necessity of life to have the A/C work as good as when new from the factory. I put in heat/sound shielding under the floor mats, and had all components check for proper functioning. I was thinking of going to a serpentine belt system that would get the newest A/C compressor with the system. Has anyone done this or have any suggestions? 9 Answers

The A/C system does not leak, holds the proper pressure

I have a 1991 Corvette convertible (not ZR1) I need to replace the Gas Tank Sending Unit and Pump assembly. 1 Answer

I have a 1991 Corvette convertible (not ZR1) I need to replace the Gas Tank Sending Unit and Pump assembly. I am getting conflicting information on what part fits. Some tell me that the same part i...