littlehorn answered 17 years ago
You may need to take this to the dealer so they can program it for you. Many times the "quick program" features do not work and the remotes must be programmed into the BCM by the dealer.
How do I program the remote? Turning the key 8 times does not work. I have a 1994 Ford Bronco Eddie Bauer
1994 Ford Bronco Eddie Bauer 4WD
-
Maintenance & Repair
1992 Ford Bronco custom xlt is it compatible with a 1996 for Bronco xlt
Ford Bronco
-
Maintenance & Repair
I got a 93 Ford bronco I was airing up the tire an it died I tried to start it an noticed fuel pump wouldn’t kick on so I changed it then noticed it still won’t kick on so I ran a hot wire still no...
1993 Ford Bronco XLT 4WD
-
Maintenance & Repair
Why does the front drive shaft turn in my four wheel drive Bronco when all tires are on the ground
1990 Ford Bronco XLT 4WD
-
Maintenance & Repair
I have a 1995 Ford Bronco, Eddie Bauer edition. It's full size with a 1994 rebuilt transmission. I'm don't know a lot about vehicles so need something simple. The ABS light came on, then the speedomet...
1995 Ford Bronco Eddie Bauer 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.