Clutch pedal on my 1994 mustang gt 5.0 won't go into gear when I step on the clutch pedal at first no resistance but a little further down it does it will go into gear with it off

Clutch pedal on my 1994 mustang gt 5.0 won't go into gear when I step on the clutch pedal at first no resistance but a little further down it does it will go into gear with it off 2 Answers

Slid sideways into a curb & cracked the rear passenger side rim on my 04' Mustang GT, I replaced the tire with the spare, But I couldn't go over 10mph, The faster I went, The more it wobbled? 5 Answers

No visible damage. Feels like somethings bent?

my 1988 mustang gt convertible usually runs great but sometimes it idles up and down and will even die. the problem stops when i accelerate but will continue at cruising speed. sometimes it does not happen for days, then when it happens it can last for a few seconds up to a day. i have replaced the cap, rotor, plugs, wires, fuel filter and egr valve. it feels like a vacuum issue, but i do not think a vacuum issue would come and go like this. i am lost! please help 3 Answers

my 1988 mustang gt convertible usually runs great but sometimes it idles up and down and will even die. the problem stops when i accelerate but will continue at cruising speed. sometimes it does not...

I have a1995 ford mustang GT 5.0. recently I was reving my engine, and just shortly after my car started bucking and hesitating. Almost dieing at a complete stop. If the stop was long enogh it would stop. I have changed the EGR valve, the IAC valve and the fuel regulator. Also I have replaced all of the hoses that go to the upper intake and the upper intake gasket. I just cleaned the MAF sensor with MAF sensor spray cleaner and now the the check enging light is on and it hesitates when I drive. but the rpms are steady as to where before they were all over the band. any Ideas 4 Answers

I have a1995 ford mustang GT 5.0. recently I was reving my engine, and just shortly after my car started bucking and hesitating. Almost dieing at a complete stop. If the stop was long enogh it would...

clutch pedal problem no resistance 3 Answers

clutch pedal has no reisitance